Tms Namespace Reference

Classes
class	ConfigInfo
	This class describes the configuration of the TMS. More...
class	CycleInformation
class	CycleInformationPeriod
	Cycle information. More...
class	CycleParam
	This class defines the parameters for a PS processing cycle. More...
class	CycleParamDb
	Internal CycleParameter management class. More...
class	CycleParamEdit
	Cycle Parameter management class. More...
class	CycleParamItem
class	CycleParamState
class	CycleTypeInformation
class	CycleTypeInformationPeriod
	Cycle Type information. More...
class	Data
	This class stores the raw data. More...
class	DataInfo
	This class defines the data to be acquired and/or fetched. More...
class	DataValue
	This is the definition of a single data value. More...
class	NameValue
class	PuChannel
	This class stores a Physical Pick-Up channel id. More...
class	PuControl
	This class defines the parameters for a test data capture. More...
class	PupeConfig
class	PuProcess
	This interface provides functions to configure and capture data from individual pick-up. More...
class	PuStateTable
	This class defines the Pick-Up state table. More...
class	PuStatus
	This class stores the status of an individual Pick-Up. More...
class	Simulation
class	TestCaptureInfo
	This class defines the parameters for a test data capture. More...
class	TmsControl
	This interface provides functions to control, test and get statistics from the TMS as a whole. More...
class	TmsEvent
	This interface provides functions for events to be sent to clients from the TMS as a whole. More...
class	TmsEventServerList
union	TmsPhase
	The Tms Phase Table Entry. More...
class	TmsProcess
	This interface provides functions to capture data from the TMS as a whole. More...
union	TmsState
	The Tms State entry. More...

Enumerations
enum	CyclePeriod {   CyclePeriodAll , CyclePeriodCalibration , CyclePeriodEvent0 , CyclePeriodEvent1 ,   CyclePeriodEvent2 , CyclePeriodEvent3 , CyclePeriodEvent4 , CyclePeriodEvent5 ,   CyclePeriodEvent6 , CyclePeriodEvent7 , CyclePeriodEvent8 , CyclePeriodEvent9 }
enum	DataType { DataTypeRaw }
enum	DataFunction {   DataFunctionRaw , DataFunctionMean , DataFunctionMeanAll , DataFunctionMean0 ,   DataFunctionMean1 }
enum	TestOutput { TestOutputFrefLocal , TestOutputPllL1 , TestOutputPllL2 }
enum	Priority { PriorityLow , PriorityNormal , PriorityHigh }
enum	TimingSig {   TimingSigClock = 0x01 , TimingSigCycleStart = 0x02 , TimingSigCycleStop = 0x04 , TimingSigCalStart = 0x08 ,   TimingSigCalStop = 0x10 , TimingSigInjection = 0x20 , TimingSigHChange = 0x40 , TimingSigFRef = 0x80 }
	The timing signal bits. More...
enum	CaptureClock {   ClkAdcDiv_1 = 0x00 , ClkAdcDiv_2 = 0x01 , ClkAdcDiv_5 = 0x02 , ClkAdcDiv_10 = 0x03 ,   ClkAdcDiv_20 = 0x04 , ClkAdcDiv_50 = 0x05 , ClkAdcDiv_100 = 0x06 , ClkAdcDiv_200 = 0x07 ,   ClkAdcDiv_500 = 0x08 , ClkAdcDiv_1000 = 0x09 , ClkAdcDiv_2000 = 0x0A , ClkAdcDiv_5000 = 0x0B ,   ClkAdcDiv_10000 = 0x0C , ClkAdcDiv_20000 = 0x0D , ClkAdcDiv_50000 = 0x0E , ClkAdcDiv_100000 = 0x0F ,   ClkMs = 0x10 , ClkFref = 0x11 }
	The Diagnostics Capture Clock settings. More...

Variables
const BUInt32	apiVersion = 0
const unsigned int	tmsNumPickups = 40
	The default number of pick ups.
const unsigned int	tmsPhaseTableSize = 512
	The size of the Phase Table.

Enumeration Type Documentation

CaptureClock

enum Tms::CaptureClock

The Diagnostics Capture Clock settings.

Enumerator
ClkAdcDiv_1	ADC Clock.
ClkAdcDiv_2	ADC Clock divided by 2.
ClkAdcDiv_5	ADC Clock divided by 5.
ClkAdcDiv_10	ADC Clock divided by 10.
ClkAdcDiv_20	ADC Clock divided by 20.
ClkAdcDiv_50	ADC Clock divided by 50.
ClkAdcDiv_100	ADC Clock divided by 100.
ClkAdcDiv_200	ADC Clock divided by 200.
ClkAdcDiv_500	ADC Clock divided by 500.
ClkAdcDiv_1000	ADC Clock divided by 1000.
ClkAdcDiv_2000	ADC Clock divided by 2000.
ClkAdcDiv_5000	ADC Clock divided by 5000.
ClkAdcDiv_10000	ADC Clock divided by 10000.
ClkAdcDiv_20000	ADC Clock divided by 20000.
ClkAdcDiv_50000	ADC Clock divided by 50000.
ClkAdcDiv_100000	ADC Clock divided by 100000.
ClkMs	Millisecond Clock.
ClkFref	FREF.

CyclePeriod

enum Tms::CyclePeriod

Enumerator
CyclePeriodAll
CyclePeriodCalibration
CyclePeriodEvent0
CyclePeriodEvent1
CyclePeriodEvent2
CyclePeriodEvent3
CyclePeriodEvent4
CyclePeriodEvent5
CyclePeriodEvent6
CyclePeriodEvent7
CyclePeriodEvent8
CyclePeriodEvent9

DataFunction

enum Tms::DataFunction

Enumerator
DataFunctionRaw
DataFunctionMean
DataFunctionMeanAll
DataFunctionMean0
DataFunctionMean1

DataType

enum Tms::DataType

Enumerator
DataTypeRaw

Priority

enum Tms::Priority

Enumerator
PriorityLow
PriorityNormal
PriorityHigh

TestOutput

enum Tms::TestOutput

Enumerator
TestOutputFrefLocal
TestOutputPllL1
TestOutputPllL2

TimingSig

enum Tms::TimingSig

The timing signal bits.

Enumerator
TimingSigClock	10MHz System Clock
TimingSigCycleStart	CYCLE_START event.
TimingSigCycleStop	CYCLE_STOP event.
TimingSigCalStart	CAL_START event.
TimingSigCalStop	CAL_STOP event.
TimingSigInjection	INJECTION event.
TimingSigHChange	HCHANGE event.
TimingSigFRef	FREF signal.

Variable Documentation

apiVersion

const BUInt32 Tms::apiVersion = 0

tmsNumPickups

const unsigned int Tms::tmsNumPickups = 40

The default number of pick ups.

tmsPhaseTableSize

const unsigned int Tms::tmsPhaseTableSize = 512

The size of the Phase Table.