################################################################################ # TmsPuServer.conf Configuration file for TmsPuServer # T.Barnaby, BEAM Ltd, 2007-02-13 ################################################################################ # # TmsServer: - The host name or IP Address of the BOAP name server host # Rings: - The number of rings serviced # ModuleControllerNumber - The Module controller number # SimulateFpga - Simulate FPGA # SimulateTiming - Simulate Timing signals in software. Bit mask (0xFF all timing signals) # Watchdog: - Set watchdog timer to the given number of seconds (0 is off) # FpgaFirmwareFile - The path to the FPGA bit file to use # FpgaLclk - The FPGA local bus clock rate # FpgaMclk - The FPGA main clock rate # PupeNumber - Defines the number of PUPE boards # PupeMaster - Defines the pupe board that has the master timing inputs # PupePhysicalOn - Use physical slot locations # PupePhysicalDevices - The list of PCI device numbers # #TmsServer: tmssc.tmsnet #TmsServer: beam TmsServer: localhost Rings: 1 ModuleControllerNumber: 1 #SimulateFpga: 0 SimulateFpga: 1 #SimulateTiming: 0x00 SimulateTiming: 0x7f Watchdog: 0 FpgaFirmwareFile: /usr/tms/fpga/tms-fpga.bit FpgaLclk: 50 FpgaMclk: 125 TempInternalMax: 50 TempFpgaMax: 90 PupeNumber: 1 PupeMaster: 1 PupePhysicalOn: 1 PupePhysicalDevices: 14