/*******************************************************************************
* Control.h Control process
* T.Barnaby, BEAM Ltd, 2007-02-07
*******************************************************************************
*/
#ifndef Control_H
#define Control_H 1
#include <stdint.h>
#include <BError.h>
#include <BThread.h>
#include <BCondInt.h>
#include <BRWLock.h>
#include <TmsApi.h>
#include <TmsEventServerList.h>
#include <main.h>
#include <DataAcquire.h>
#include <PuServer.h>
class Control;
class DataRequest {
public:
DataRequest(DataInfo dataInfo);
public:
DataInfo dataInfo;
};
class CycleInfo {
public:
CycleInfo(UInt32 cycleNumber, BString cycleType);
public:
UInt32 cycleNumber;
BString cycleType;
BList<BError> errorList;
};
class CycleInfoList {
public:
enum { numCycles = 8 };
CycleInfoList();
void cycleAdd(UInt32 cycleNumber, BString cycleType);
void cycleAddError(UInt32 cycleNumber, BError error);
BList<BError> getCycleErrors(UInt32 cycleNumber);
private:
BMutex olock;
BList<CycleInfo> olist;
};
/// A Timer test class. this implements a simple timer operated function called every second, that can be used to check on system resources.
class ControlTimer : public BThread {
public:
ControlTimer(Control& control);
void* function();
private:
Control& ocontrol;
};
/// The main system control class
class Control {
public:
Control(int dbFixed);
~Control();
// Main functionality
BError init(); ///< Initialise the system
void run(); ///< Start the system running
// Commands
BError initCmd();
BError setProcessPriority(BUInt32 priority);
BError configure(ConfigInfo configInfo); ///< Configure the system for use. This includes mapping the individual physical PickUp channels to logical pickup channels.
BError getConfiguration(ConfigInfo& configInfo);
BError test(BList<BError>& errors); ///< Performs�a�basic�test�of�the�system�returning�a�list�of�errors.�The�call�will�return�an�error�object�indicating�success�or�an�error�condition�as�appropriate.
BError getStatus(BList<NameValue>& statusList); ///< Returns�the�current�status�of�the�system.�This�information�includes�the�number�of�Pick�Up\u2019s�present�and�their�individual�status.
BError getStatistics(BList<NameValue>& statsList); ///< Returns�a�list�of�the�statistic�values�as�name/value�pairs.�The�call�will�return�an�error�object�indicating�success�or�an�error�condition�as�appropriate.
BError getPuChannel(UInt32& puChannel, PuChannel& puPhysChannel); ///< Returns the physical module/Pupe/Channel number given a logical PickUp id. This can be used so that the individual PickUps test functions can be accessed etc.
BError puServerStarted(UInt32 number); ///< A TmsPuServer has started
BError setSimulation(Simulation simulation);
BError getSimulation(Simulation& simulation);
BError setTestMode(PuChannel puPhysChannel, UInt32 testOutput, UInt32 timingDisableMask); ///< The signal source for the digital test output connector. 0: None, 1: FrefDelayed, 2: PllFRef, 3: PllFRefHarm. The timingDisableMask bit mask defines which of the timing inputs should be disabled. If a timing input is disabled it can be still operated by software command.
BError setTimingSignals(PuChannel puPhysChannel, UInt32 timingSignals); ///< This function sets the given timing signals to the values as defined in the timingSignals bit array.
BError captureDiagnostics(PuChannel puPhysChannel, TestCaptureInfo captureInfo, BArray<UInt64>& data); ///< This function will capture test data
BError setTestData(PuChannel puPhysChannel, Int32 on, BArray<UInt32> data); ///< This function will set a PU channel to sample data from memory rather than the ADC's
BError setPupeConfig(PuChannel puPhysChannel, PupeConfig pupeConfig);
BError getPupeConfig(PuChannel puPhysChannel, PupeConfig& pupeConfig);
BError setControlInfo(CycleParam params); ///< Sets the control information for the cycle number given and subsequent cycles. The parameters for the processing cycle are passed, this includes the Phase and State table information. The call will return an error object indicating success or an error
